WIP-C1

WIP | Carbide

Wear and Impact/Corrosion | Cold Spray

Wear and Impact Resistant Chrome-Carbide based material designed specifically for cold spray coating buildup, Highly dense coating with Helium or Nitrogen cold spray, Excellent flowability, Non-flammable solid

Material
Carbide
Geometry
Spherical
Hardness
375-425HV
Lug Shear
25-35ksi
Porosity
<1 % (N2)
*All mechanical properties are as-sprayed
D10D25D50D75D90
19 21 27 33 42

This chromium carbide material is agglomerated with nickel to achieve very hard, wear, and impact resistant properties. This material was designed for manufacturing coatings applied via cold spray with either nitrogen or helium and can be build up to coating thicknesses >0.25” with minimal porosity. Deposits can be machined by either milling or turning and/or ground. WIP – C1 has very high flowability and is inertly vacuum sealed for long shelf life and transport. WIP – C1 can be vacuum packaged in 1, 2.5, 10 pound bags.

An error has occurred. This application may no longer respond until reloaded. Reload 🗙